beautypg.com

Dist-a (r3) - configuration – Brocade FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide User Manual

Page 201

background image

lag lag_agg_b_3 dynamic id 108

ports ethe 1/21 to 1/23

primary-port 1/21

deploy

!

lag lag_agg_b_4 dynamic id 109

ports ethe 1/15 to 1/16

primary-port 1/15

deploy

!

vlan 2 name session-vlan by port

tagged ethe 2/1 to 2/2

router-interface ve 2

!

vlan 3 name keep-alive-vlan by port

tagged ethe 1/11

router-interface ve 3

!

!

vlan 1905 by port

tagged ethe 1/15 to 1/19 ethe 1/21 to 1/23 ethe 2/1 to 2/2

!

hostname R2

!

interface ve 2

ip address 10.1.1.2 255.255.255.0

!

interface ve 3

ip address 10.1.2.2 255.255.255.0

!

cluster MCT1 1

rbridge-id 2

session-vlan 2

keep-alive-vlan 3

icl BH1 ethernet 2/1

peer 10.1.1.1 rbridge-id 1 icl BH1

deploy

client client-1

rbridge-id 1901

client-interface ethe 1/21

deploy

client client-2

rbridge-id 1902

client-interface ethe 1/17

deploy

client DIST_Cluster

rbridge-id 1903

client-interface ethe 1/15

deploy

!

DIST-A (R3) - Configuration

This example presents the configuration for the DIST-A (R3) cluster device in

Figure 35

on page 199.

!

lag lag_dist_a_1 static id 15

ports ethe 1/1 to 1/2

primary-port 1/1

deploy

lag lag_dist_a_2 dynamic id 16

ports ethe 15/1 to 15/2

primary-port 15/1

deploy

!

lag keep-alive static id 200

ports ether 11/25 to 11/36

primary-port 11/25

deploy

!

vlan 5 name session-vlan by port

tagged ethe 1/1 to 1/2

router-interface ve 5

!

vlan 6 name keep-alive-vlan by port

DIST-A (R3) - Configuration

FastIron Ethernet Switch Platform and Layer 2 Switching Configuration Guide

201

53-1003086-04