beautypg.com

4 dax operation during stop, Dax operation during stop -15 – Motorola DSP56012 User Manual

Page 225

background image

Digital Audio Transmitter

DAX Programming Considerations

MOTOROLA

DSP56012 User’s Manual

8-15

8.6.4

DAX Operation During Stop

The DAX operation cannot continue when the DSP is in the Stop state since no DSP
clocks are active. While the DSP is in the Stop state, the DAX will remain in the
individual reset state and the status flags are initialized as described for resets. No
DAX control bits are affected. It is recommended that the DAX be disabled, by
clearing the XEN bit in the XCTR, before the DSP enters the Stop state.