Motorola AX - Manual

AX TM Series
Two-Way Business Radio
Attaching and Removing the Antenna
To Attach Antenna
To Remove Antenna
1. Fasten the antenna to the radio by placing the threaded end of
the antenna into the Antenna Connector.
2. Rotate the antenna clockwise until tight.
1. Turn the antenna in a counter-clockwise direction until it dis-
engages from the radio.
Antenna Connector
Threaded End
of Antenna
Attaching and Removing the Battery
To Attach Battery
To Remove Battery
1. Fit the battery slots with the grooves on the radio.
2. Slide the battery upwards until a click is heard.
1. Slide the battery clasp away from the radio.
2. Slide the battery downwards.
3. Pull the battery away from the radio.
Battery Slots
Grooves
Battery
Clasp
Attaching and Removing the Belt Clip
To Attach Belt Clip
To Remove Belt Clip
1. Align mounting rails of the radio with the grooves of the belt
clip.
2. Slide the belt clip downwards until it clicks into place.
1. Insert the end of a key between the release tab and the back
surface of the radio.
2. Lift the release tab.
3. Slide the belt clip upwards.
Release Tab
Mounting Grooves
Charging your Radio
Your AX Series radio comes with a charging base and transformer.
Important Note: For instructions and safety information, please read
the Charger Safety Instruction pamphlet (Motorola publication part
number 6881098C01) enclosed with your charger.
Note: The charger base accommodates either a stand-alone battery or
the radio with battery attached. If you charge the radio with battery
attached, make sure that the radio is OFF.
The battery is fully charged after approximately 13 hours. The LED
remains lit until you remove the battery or the radio from the charger.
1. Insert the transformer connector into the socket on the back
of the charger base.
2. Plug the opposite end of the connector into the AC wall
outlet.
3. Insert either a stand-alone battery or a radio with battery into
the charging pocket.
When the battery or the radio with battery is seated properly
in the pocket, the LED on the charger lights red.
MOTOROLA and the Stylized M logo are registered in the U.S.
Patent and Trademark Office. All other product or service
names are the property of their respective owners.
© 2004 Motorola, Inc.
Printed in U.S.A. All Rights Reserved.
Motorola, Inc.
8000 W. Sunrise Boulevard, Plantation FL 33322
Motorola® AX™ Series
*6880309R86*
6880309R86-O
Proof of Purchase
Choking Hazard – Small Parts!
Not for children under three years.
This product is not to be used as a
toy or plaything.
!
W A R N I N G
!
FCC Licensing Inf ormat ion
AX™ Ser ies profession al two-way ra dios operate on radio frequencies
that ar e regulat ed by the F ede ral Com muni cation s Comm ission (FCC).
In order to transmit on these freque ncies, you are required to have a
licen se is sued by the FCC.
Application is made available o n FCC Form s 601, schedules D and H,
and Remittance Form 159.
To obt ain the se FCC forms, pl ease use the following contact
inform ation:
Faxe d: Mailed: Questions regar ding
Contact the Fa x-On- Call the FCC forms FCC license:
Demand sys tem at: hotline at: Contac t the FCC a t:
1-202 -41 8-0 177 1-800 -418- FO RM 1-88 8-CALL- FC C
Request for ms 30 00159, 1-800 -418- 3676 1-88 8-225 -5322
30600 01, 306 000 3, or: h ttp://www .fcc. gov
30600 06 Req uest form 0006 01 Request f orm 00 0601
Before filling out your applicat ion, you must decide which
frequency(ies) you can oper ate o n. Fo r question s on determining your
radio frequency , p lease call Motorola Product Services at
1-800-448-6686.
Changes or modification s not ex pressly approved by Mo torola may
void the us er’s authority granted by the FCC to operate this radio and
should not be made. T o comply with FCC re quireme nts, tr ansmitte r
adjustments should be made only by or under the supervision of a
person certified as te chnically qu alified to p erform tran smitter
maintenance and repairs in the private land mobile and fi xed services as
certified by an organization representa tive of th e user of those se rvices.
Replacement of an y transmitter component (crystal, semiconductor,
etc. ) not a utho riz ed by the FCC equip men t author ization for this radio
could violate FCC rules.
Note:Use o f this r adio outside th e count ry where it was intended to be
distributed is subject to gover nment regulations and may be
prohibited.
Product Safe ty a nd RF Ex posure Complia nce
ATTENTION!
This radio is res tri cted to oc cupa tional use on ly to satisfy FCC RF
ener gy exposur e r eq uir em ents. Before u sing this p roduct, read the RF
energy awareness in formation and ope rating instructions in the Product
Safety and RF Exposure bo oklet enclosed with your radio (Motoro la
Publication part number 68P81095C98) to ensu re compliance with RF
ener gy exposur e lim its.
Access ories
There are a number of accessories to enhance the productivity of your
two-way radio. Many of the availabl e acce sso ries are li ste d be low.
Before using this produc t, read the op erating
instructions for safe usage contained in the Product
Safety and RF Exposure booklet enclo sed with you r
radio.
Antennas
PMAE4011 435-480 MHz, Helical Antenna, 10cm
PMAD4028 148-174 MHz, He lical Antenna, 15cm
NAE6483 403-520 MHz, Whip Antenna
(ships with UHF model radio)
NAD6502 146-174 MHz, Heliflex Antenna
(ships with VHF model radio)
Audio Acc essories
53815* Lightweight Headset with Boo m Microp hone
53862 Remote Speaker Microphone
53863* Earpiece with Microp hone
53865* Headset with Swivel B oom Microphone
53866 Earbud with Clip PT T and Microphone
56517 Earpiece with In-Line P TT Microphone
56518* Earpiece with Boom Microphone
!
C a u t i o n
* Hands-free VOX-compatible audio accessories
Battery
PMNN4063 NiMH Recharge able 7.2V Battery
Carry Acc essories
HLN9714 2.5-in. Belt Clip
Chargers
RLN4940 Slow Desktop C har ger Kit