PLANET WGS3-24240 - Manual (Page 91)

User’s Manual of WGS3-24000 / WGS3-24240
91
4.2.9.6 Upload File From Switch
Use this menu to upload a configuration or log file from the switch.
Figure 4-2-46 Upload File from Switch
Configurable Data
Object Description
• File Type Specify the type of file you want to upload. The available options are
Configuration, Error Log, System Trace, and Trap Log. The factory default is
Error Log.
• TFTP Server IP
Address
Enter the IP address of the TFTP server. The factory default is 0.0.0.0
• TFTP File Path Enter the path on the TFTP server where you want to put the file being uploaded.
You may enter up to 32 characters. The factory default is blank.
• TFTP File Name Enter the name you want to give the file being uploaded. You may enter up to 32
characters. The factory default is blank.
• Start File Transfer To initiate the upload you need to check this box and then select the submit
button.
4.2.9.7 Ping
Use this screen to tell the switch to send a Ping request to a specified IP address. You can use this to check whether the switch
can communicate with a particular IP station. Once you click the Submit button, the switch will send three pings and the results
will be displayed below the configurable data. If a reply to the ping is not received, you will see No Reply Received from IP
xxx.xxx.xxx.xxx, otherwise you will see Reply received from IP xxx.xxx.xxx.xxx : (send count = 3, receive count = n).