PLANET WGS3-24240 User Manual
Page 270
User’s Manual of WGS3-24000 / WGS3-24240
270
• IP address
Enter the IP Address for the address range for the selected area.
• Subnet Mask
Enter the Subnet Mask for the address range for the selected area.
• LSDB Type
Select the type of Link Advertisement associated with the specified area and
address range. The default type is 'Network Summary'.
• Advertisement
Select enable or disable from the pulldown menu. If you selected enable the
address range will be advertised outside the area via a Network Summary LSA.
The default is enable.
• Create button
Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed. The new address range will be added to the display in the
non-configurable data area.
• Delete button
Removes the specified address range from the area configuration.
Non-Configurable Data
Object
Description
• Area ID
The OSPF area.
• IP address
The IP Address of an address range for the area.
• Subnet Mask
The Subnet Mask of an address range for the area.
• LSDB Type
The Link Advertisement type for the address range and area.
• Advertisement
The Advertisement mode for the address range and area.