PLANET WGS3-24240 - Manual (Page 484)

User’s Manual of WGS3-24000 / WGS3-24240
484
12.2.26 show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about the fields that are displayed.
▫ Format show ip stats
▫ Modes Privileged EXEC
User EXEC
12.3 Router Discovery Protocol Commands
This section describes the commands you use to view and configure Router Discovery Protocol settings on the switch. The
Router Discovery Protocol enables a host to discover the IP address of routers on the subnet.
12.3.1 ip irdp
This command enables Router Discovery on an interface.
▫ Default disabled
▫ Format ip irdp
▫ Mode Interface Config
12.3.1.1 no ip irdp
This command disables Router Discovery on an interface.
▫ Format no ip irdp
▫ Mode Interface Config
12.3.2 ip irdp address
This command configures the address that the interface uses to send the router discovery advertisements. The valid values for
are 224.0.0.1, which is the all-hosts IP multicast address, and 255.255.255.255, which is the limited broadcast
address.
▫ Default 224.0.0.1
▫ Format ip irdp address
▫ Mode Interface Config
12.3.2.1 no ip irdp address
This command configures the default address used to advertise the router for the interface.
▫ Format no ip irdp address
▫ Mode Interface Config