PLANET WGS3-24240 - Manual (Page 178)

User’s Manual of WGS3-24000 / WGS3-24240
178
Command Buttons
Object Description
• Initialize - This button begins the initialization sequence on the selected port. This button is
only selectable if the control mode is is 'auto'. If the button is not selectable, it will
be grayed out. Once this button is pressed, the action is immediate. It is not
required to press the Submit button for the action to occur.
• Reauthenticate This button begins the reauthentication sequence on the selected port. This
button is only selectable if the control mode is is 'auto'. If the button is not
selectable, it will be grayed out. Once this button is pressed, the action is
immediate. It is not required to press the Submit button for the action to occur.
• Submit - Send the updated screen to the switch and cause the changes to take effect on
the switch but these changes will not be retained across a power cycle unless a
save is performed.
• Refresh - Update the information on the page.
• Initialize - This button begins the initialization sequence on the selected port. This button is
only selectable if the control mode is is 'auto'. If the button is not selectable, it will
be grayed out. Once this button is pressed, the action is immediate. It is not
required to press the Submit button for the action to occur.
• Reauthenticate - This button begins the reauthentication sequence on the selected port. This
button is only selectable if the control mode is is 'auto'. If the button is not
selectable, it will be grayed out. Once this button is pressed, the action is
immediate. It is not required to press the Submit button for the action to occur.
• Submit - Send the updated screen to the switch and cause the changes to take effect on
the switch but these changes will not be retained across a power cycle unless a
save is performed.
• Refresh - Update the information on the page.