PLANET WGS3-24240 User Manual
Page 231
User’s Manual of WGS3-24000 / WGS3-24240
231
Select 'All' to set the parameters for all ports to the same values.
• Traffic Class
Specify which internal traffic class to map the corresponding IP DSCP.
• IP DSCP
Displays the IP Precedence to be mapped.
4.5.5.4 Interface Configuration
Figure 4-5-29 CoS Interface Configuation
Class of Service (CoS) Interface Configuration
Selection Criteria
Object
Description
• Slot/Port
Specifies all CoS configurable interfaces. The option "Global" represents the
most recent global configuration settings. These may be overridden on a
per-interface basis.
Configurable Data
Object
Description
• Interface Shaping Rate Specifies the maximum bandwidth allowed, typically used to shape the outbound
transmission rate. This value is controlled independently of any per-queue
maximum bandwidth configuration. It is effectively a second-level shaping
mechanism. Default value is 0. Valid Range is (0 to 10000000) KBPS with a step
size of 64 .The value 0 means maximum is unlimited.
• Restore Defaults
button
Restores default settings.
• Submit button
Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.