PLANET WGS3-24240 - Manual (Page 489)

User’s Manual of WGS3-24000 / WGS3-24240
489
address, you must delete the virtual router on the interface.
▫ Format no ip vrrp secondary
▫ Mode Interface Config
12.5.5 ip vrrp authentication
This command sets the authorization details value for the virtual router configured on a specified interface. The parameter {none
| simple} specifies the authorization type for virtual router configured on the specified interface. The parameter [key] is optional,
it is only required when authorization type is simple text password. The parameter is the virtual router ID which has an
integer value ranges from 1 to 255.
▫ Default no authorization
▫ Format ip vrrp authentication {none | simple }
▫ Mode Interface Config
12.5.5.1 no ip vrrp authentication
This command sets the default authorization details value for the virtual router configured on a specified interface.
▫ Format no ip vrrp authentication
▫ Mode Interface Config
12.5.6 ip vrrp preempt
This command sets the preemption mode value for the virtual router configured on a specified interface. The parameter
is the virtual router ID, which is an integer from 1 to 255
▫ Default enabled
▫ Format ip vrrp preempt
▫ Mode Interface Config
12.5.6.1 no ip vrrp preempt
This command sets the default preemption mode value for the virtual router configured on a specified interface.
▫ Format no ip vrrp preempt
▫ Mode Interface Config
12.5.7 ip vrrp priority
This command sets the priority value for the virtual router configured on a specified interface. The priority of the interface is a
priority integer from 1 to 254. The parameter is the virtual router ID which has an integer value ranges from 1 to 255.
▫ Default 100
▫ Format ip vrrp priority <1-254>