PLANET WGS3-24240 User Manual
Page 197
User’s Manual of WGS3-24000 / WGS3-24240
197
4.4.3.2 Server Configuration
This page is to configure the TACACS+ Serve, include IP Address, port and and Key String.
Figure 4-4-18 TACACS+ Server Configuration
Selection Criteria
Object
Description
• TACACS+ Server
Selects the TACACS+ server for which data is to be displayed or configured. If
the add item is selected, a new TACACS server can be configured.
Configurable Data
Object
Description
• IP Address
Specifies the TACACS+ Server IP address.
• Priority
Specifies the order in which the TACACS+ servers are used. It should be within
the range 0-65535.
• Port
Specifies the authentication port. It should be within the range 0-65535.
• Key String
Specifies the authentication and encryption key for TACACS+ communications
between the device and the TACACS+ server. The valid range is 0-128
characters.
The key must match the encryption used on the TACACS+
server.
• Connection Timeout
The amount of time that passes before the connection between the device and
the TACACS+ server time out. The range is between 1-30.
• Submit button
Send the updated screen to the switch and cause the changes to take effect on
the switch but these changes will not be retained across a power cycle unless a
save is performed.
• Remove button
Remove the selected server from the configuration.