PLANET WGS3-24240 - Manual (Page 446)

User’s Manual of WGS3-24000 / WGS3-24240
446
10. CLI COMMANDS: SECURITY
10.1 Security Commands
This section describes commands used for configuring security settings for login users and port users.
10.1.1 authentication login
This command creates an authentication login list. The is up to 15 alphanumeric characters and is not case
sensitive. Up to 10 authentication login lists can be configured on the switch. When a list is created, the authentication method
"local" is set as the first method.
When the optional parameters "Option1", "Option2" and/or "Option3" are used, an ordered list of methods are set in the
authentication login list. If the authentication login list does not exist, a new authentication login list os first created and then the
authentication methods are set in the authentication login list. The maximum number of authentication login methods is three.
The possible method values are local, radius and reject.
The value of local indicates that the user's locally stored ID and password are used for authentication. The value of radius
indicates that the user's ID and password will be authenticated using the RADIUS server. The value of reject indicates that the
user is never authenticated.
To authenticate a user, the authentication methods in the user's login will be attempted in order until an authentication attempt
succeeds or fails.
Note that the default login list included with the default configuration can not be changed.
▫ Format authentication login [method1 [method2 [method3]]]
▫ Mode Global Config
10.1.1.1 no authentication login
This command deletes the specified authentication login list. The attempt to delete will fail if any of the following conditions are
true:
▫ The login list name is invalid or does not match an existing authentication login list
▫ The specified authentication login list is assigned to any user or to the nonconfigured user for any component
▫ The login list is the default login list included with the default configuration and was not created using 'authentication login'.
The default login list cannot be deleted.
▫ Format no authentication login
▫ Mode Global Config
10.1.2 clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
▫ Format clear dot1x statistics { | all}
▫ Mode Privileged EXEC