PLANET WGS3-24240 - Manual (Page 217)

User’s Manual of WGS3-24000 / WGS3-24240
217
considered to match the specified class and no additional input information is
needed. The content of this drop down list varies for a specified class based on
the selection of the match criterion 'Reference Class':
¾ If the specified class does not reference any other class, the 'Reference
Class' match criterion is included in the drop down match criteria list. A
class reference can be established by selecting 'Reference Class' and
invoking the 'Add Match Criteria' button.
¾ If the specified class references another class, the 'Reference Class' match
criterion is not included in the drop down match criteria list. This prevents
the user from trying to add yet another class reference, since a specified
class can reference at most one other class of the same type. Moreover, a
'Remove Class Reference' button appears on the screen that can be
invoked to remove the current class reference.
Configurable Data
Object Description
• Class Name This is a case-sensitive alphanumeric string from 1 to 31 characters uniquely
identifying a class. Class name 'default' is reserved and must not be used.
Non-Configurable Data
Object Description
• Class Type Displays type of the configured class as 'all', 'any', or 'acl'. Only when a new class
is created, this field is a selector field. After class creation this becomes a
non-configurable field.
• Match Criteria Displays the configured match criteria for the specified class.
• Values Displays the values of the configured match criteria.
• Excluded Displays the inclusion or exclusion of the configured match criteria. When a
match criterion is configured to be excluded, 'Yes' is displayed. Conversely, when
a match criterion is configured to be included, 'No' is displayed.