28 show radius statistics – PLANET WGS3-24240 User Manual
Page 456

User’s Manual of WGS3-24000 / WGS3-24240
456
▫
Accounting Mode - Yes or No
If the optional token 'servers' is included, the following information regarding the configured RADIUS servers is displayed.
▫
IP Address - IP Address of the configured RADIUS server
▫
Port -The port in use by this server
▫
Type - Primary or secondary
▫
Secret Configured - Yes / No
10.1.28 show radius statistics
This command is used to display the statistics for RADIUS or configured server . To show the confifured RADIUS server statistic,
the IP Address specified must match that of a previously configured RADIUS server. On execution, the following fields are
displayed.
▫
Format show radius statistics [ipaddr]
▫
Mode
Privileged EXEC
If ip address is not specified than only Invalis Server Address filed is displayed. Otherwise other listed fields are displayed.
▫
Invalid Server Addresses - The number of RADIUS Access-Response packets received from unknown addresses.
▫
Server IP Address
▫
Round Trip Time - The time interval, in hundredths of a second, between the most recent Access-Reply/
Access-Challenge and the Access-Request that matched it from the RADIUS authentication server.
▫
Access Requests - The number of RADIUS Access-Request packets sent to this server. This number does not include
retransmissions.
▫
Access Retransmission - The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication
server.
▫
Access Accepts - The number of RADIUS Access-Accept packets, including both valid and invalid packets, which were
received from this server.
▫
Access Rejects - The number of RADIUS Access-Reject packets, including both valid and invalid packets, which were
received from this server.
▫
Access Challenges - The number of RADIUS Access-Challenge packets, including both valid and invalid packets, which
were received from this server.
▫
Malformed Access Responses - The number of malformed RADIUS Access-Response packets received from this
server. Malformed packets include packets with an invalid length. Bad authenticators or signature attributes or unknown
types are not included as malformed access responses.
▫
Bad Authenticators - The number of RADIUS Access-Response packets containing invalid authenticators or signature
attributes received from this server.
▫
Pending Requests - The number of RADIUS Access-Request packets destined for this server that have not yet timed out
or received a response.
▫
Timeouts - The number of authentication timeouts to this server.
▫
Unknown Types - The number of RADIUS packets of unknown types, which were received from this server on the
authentication port.
▫
Packets Dropped - The number of RADIUS packets received from this server on the authentication port and dropped for
some other reason.