PLANET WGS3-24240 - Manual (Page 187)

User’s Manual of WGS3-24000 / WGS3-24240
187
unless a save is performed.
• Refresh button Update the information on the page.
„ Windows Platform RADIUS Server Configuration
1. Setup the RADIUS server and assign the client IP address to the switch. In this case, field in the default IP Address of
the switch with 192.168.0.100. And also make sure the shared secret key is as same as the one you had set at the
switch RADIUS server – 12345678 at this case.
Figure 4-4-10 Windows Server RADIUS Server setting
2. Configure ports attribute of 802.1X, the same as “802.1X Port Status Configuration”.