2 vlan routing – PLANET WGS3-24240 User Manual
Page 245
User’s Manual of WGS3-24000 / WGS3-24240
245
4.6.2 VLAN Routing
4.6.2.1 VLAN Routing Configuration
Figure 4-6-5 VLAN Routing Configuraiton
Selection Criteria
Object
Description
• VLAN ID
Enter the ID of a VLAN you want to configure for VLAN Routing. Initially, the field
will display the ID of the first VLAN. After you enter a new VLAN ID and click on
the Create button the non-configurable data will be displayed. See below for
detailed instructions on how to use that data to complete the configuration of the
VLAN.
• Create button
Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.
• Delete button
Remove the VLAN Routing Interface SPECIFIED in the VLAN ID input field from
the router configuration.
Non-Configurable Data
Object
Description
• Slot/Port
The interface assigned to the VLAN for routing.
• MAC Address
The MAC Address assigned to the VLAN Routing Interface.
• IP Address
The configured IP Address of the VLAN Routing Interface. This will be 0.0.0.0
when the VLAN Routing Interface is first configured and must be entered on the
IP Interface Configuration page.