PLANET WGS3-24240 - Manual (Page 109)

User’s Manual of WGS3-24000 / WGS3-24240
109
• Version Specifies the NTP Version running on the server. Allowed range is (1 to 4).
Default value is 4.
• Submit button Sends the updated configuration to the switch. Configuration changes take effect
immediately.
• Delete button Deletes the SNTP Server entry. Sends the updated configuration to the switch.
Configuration changes take effect immediately.
It is recommended that you research any time server selection to ensure that it can meet your
specific time server requirements. Any NTP time server selection should be evaluated to determine if
the server in question meets your specific time server requirements.
For more detail about the Time Server and Time Server List, please refer to the following URL:
http://ntp.isc.org/bin/view/Servers/WebHome
http://ntp.isc.org/bin/view/Servers/NTPPoolServers
http://support.microsoft.com/kb/262680/en-us
4.2.12.4 Server Status
Figure 4-2-62 SNTP Server Status
Non-Configurable Data
Object Description
• Address Specifies all the existing Server Addresses. If no Server configuration exists, a
message saying "No SNTP server exists" flashes on the screen.
• Last Update Time Specifies the local date and time (UTC) that the response from this server was
used to update the system clock.