PLANET WGS3-24240 - Manual (Page 437)

User’s Manual of WGS3-24000 / WGS3-24240
437
kilobits-per-second (Kbps) and is an integer from 1 to 4294967295.
"
Note : Queue depth management defaults to tail drop, but the randomdrop command can be used to change to a RED
scheme.
▫ Format shape bps-average <1-4294967295>
▫ Mode Policy-Class-Map Config
▫ Restrictions - This shaping rate must not exceed the maximum link data rate of the interface to which the policy is
applied.
▫ Policy Type - Out
9.5.15 shape bps-peak
This command is used to establish peak rate traffic shaping for the specified class, which allows transmissions for the class to
exceed the committed information rate by sending excess traffic with the understanding that it could be dropped by a
downstream network element. Two rate parameters are used, a committed information rate and a peak information rate. Each
of these rates is specified in kilobits-per-second (Kbps) and is an integer from 1 to 4294967295. The peak rate must be
specified as equal to or greater than the committed rate.
"
Note : Queue depth management defaults to tail drop, but the randomdrop command can be used to change to a RED
scheme.
▫ Format shape bps-peak <1-4294967295> <1-4294967295>
▫ Mode Policy-Class-Map Config
▫ Restrictions - Neither of the shaping rate parameters is allowed to exceed the maximum link data rate of the interface to
which the policy is applied.
▫ Policy Type - Out
▫ Incompatibilities - Expedite (all forms)