PLANET WGS3-24240 User Manual
Page 246
User’s Manual of WGS3-24000 / WGS3-24240
246
• Subnet Mask
The configured Subnet Mask of the VLAN Routing Interface. This will be 0.0.0.0
when the VLAN Routing Interface is first configured and must be entered on the
IP Interface Configuration page.
Instructions for creating a VLAN
。
Enter a new VLAN ID in the field labeled VLAN ID.
。
Click on the Create button. The page will be updated to display the interface and MAC address assigned to this new
VLAN. The IP address and Subnet Mask fields will be 0.0.0.0.
。
Note the interface assigned to the VLAN.
。
Use the index pane to change to the IP Interface Configuration page.
。
Select the interface assigned to the VLAN. The IP address and Subnet Mask fields will be 0.0.0.0.
。
Enter the IP address and subnet mask for the VLAN.
。
Select the Submit button.
Change back to the VLAN Routing Summary page. The new VLAN should appear in the table with the correct IP address and
subnet mask assigned.
Figure 4-6-6 IP Interface Configuation