22 show ip interface brief – PLANET WGS3-24240 User Manual
Page 481

User’s Manual of WGS3-24000 / WGS3-24240
481
Local Proxy ARP
Displays whether Local Proxy ARP is enabled or disabled on the interface.
Active State
Displays whether the interface is active or inactive. An interface is considered active if its
link is up and it is in forwarding state.
Link Speed Data Rate
Is an integer representing the physical link data rate of the specified interface. This is
measured in Megabits per second (Mbps).
MAC Address
Is the burned in physical address of the specified interface. The format is 6 two-digit
hexadecimal numbers that are separated by colons
Encapsulation Type
Is the encapsulation type for the specified interface.
The types are: Ethernet or SNAP.
IP MTU
Displays the maximum transmission unit (MTU) size of a frame, in bytes.
Example: show ip interface
(Routing) # show ip interface 0/2
Routing Configuration.............................. Enable
Interface Configuration Status................. Enable
Forward Net Directed Broadcasts............ Disable
Proxy ARP...................................... ……..Enable
Local Proxy ARP................................ …..Disable
Active State.............................................. Active
Link Speed Data Rate............................. 100 Full
MAC Address........................................... 00:10:4B:D2:17:83
Encapsulation Type................................. Ethernet
IP MTU.................................................... 1500
12.2.22 show ip interface brief
This command displays summary information about IP configuration settings for all ports in the router.
▫
Format show ip interface brief
▫
Modes Privileged EXEC
User EXEC
Interface Valid slot and port number separated by forward slashes.
IP Address
The IP address of the routing interface in 32-bit dotted decimal format.
IP Mask
The IP mask of the routing interface in 32-bit dotted decimal format.
Netdir Bcast
Indicates if IP forwards net-directed broadcasts on this interface.
Possible values are Enable or Disable.
MultiCast Fwd
Indicates the multicast forwarding administrative mode on the interface.