PLANET WGS3-24240 User Manual
Page 352
User’s Manual of WGS3-24000 / WGS3-24240
352
Non-Configurable Data
Object
Description
• Group Address
The group address transmitted in Candidate-RP-Advertisements.
• Group Mask
The group address mask transmitted in Candidate-RP-Advertisements to fully
identify the scope of the group which the router will support if elected as a
Rendezvous Point.
• Address
Displays the unicast address of the interface which will be advertised as a
Candidate RP.
• Refresh button
Refresh the data on the screen with the present state of the data in the router.
4.7.6.8 PIM-SM Static RP Configuration
Figure 4-6-85 PIM-SM Static RP Configuation
Configurable Data
Object
Description
• IP Address
IP Address of the RP to be created or deleted.
• Group
Group Address of the RP to be created or deleted.
• Group Mask
Group Mask of the RP to be created or deleted.
• Submit button
Attempts to create the specified static RP IP Address for the PIM-SM router.
Configuration changes take effect immediately. These changes will not be
retained across a power cycle unless a save is performed.
• Delete button
Attempts to remove the specified static RP IP Address for the PIM-SM router.
Configuration changes take effect immediately. These changes will not be
retained across a power cycle unless a save is performed.