PLANET WGS3-24240 User Manual
Page 317
User’s Manual of WGS3-24000 / WGS3-24240
317
Configurable Data
Object
Description
• Admin Mode
Select enable or disable from the pulldown menu to set the administrative status
of IGMP in the router to active or inactive. The default is disable.
• Submit
Send the updated configuration to the router. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.
4.7.2.2 IGMP Interface Configuration
Figure 4-6-57 IGMP Interface Configuration
Selection Criteria
Object
Description
• Slot/Port
Select the slot and port for which data is to be displayed or configured from the
pulldown menu. Slot 0 is the base unit. You must have configured at least one
router interface before configuring or displaying data for an IGMP interface,
otherwise an error message will be displayed.