PLANET WGS3-24240 - Manual (Page 162)

User’s Manual of WGS3-24000 / WGS3-24240
162
4.3.8.3 Spanning Tree MST Configuration/Status
Figure 4-3-35 Spanning Tree MST Configuration/Status
Selection Criteria
Object Description
• MST ID Create a new MST which you wish to configure or configure already existing
MSTs.
Configurable Data
Object Description
• MST ID This is only visible when the select option of the MST ID select box is selected.
The ID of the MST being created. Valid values for this are between 1 and 4094.
• Priority The bridge priority for the MST instance selected. The bridge priority is set in
multiples of 4096. For example if the priority is attempted to be set to any value
between 0 and 4095 , it will be set to 0. If it is tried to be set to any value between
4096 and (2*4096-1) it will be set to 4096 and so on.
• VLAN ID This gives a list box of all VLANs on the switch. The VLANs associated with the
MST instance which is selected are highlighted on the list. These can be selected
or unselected for re-configuring the association of VLANs to MST instances.