PLANET WGS3-24240 User Manual
Page 289
User’s Manual of WGS3-24000 / WGS3-24240
289
Object
Description
• Static
The static route preference value in the router. The default value is 1. The range
is 1 to 255.
• OSPF Intra
The OSPF intra route preference value in the router. The default value is 8. The
range is 1 to 255. The OSPF specification (RFC 2328) requires that preferences
must be given to the routes learned via OSPF in the following order: intra < inter
< type-1 < type-2.
• OSPF Inter
The OSPF inter route preference value in the router. The default value is 10. The
range is 1 to 255. The OSPF specification (RFC 2328) requires that preferences
must be given to the routes learned via OSPF in the following order: intra < inter
< type-1 < type-2.
• OSPF Type-1
The OSPF type-1 route preference value in the router. The default value is 13.
The range is 1 to 255. The OSPF specification (RFC 2328) requires that
preferences must be given to the routes learned via OSPF in the following order:
intra < inter < type-1 < type-2.
• OSPF Type-2
The OSPF type-2 route preference value in the router. The default value is 150.
The range is 1 to 255. The OSPF specification (RFC 2328) requires that
preferences must be given to the routes learned via OSPF in the following order:
intra < inter < type-1 < type-2.
• RIP
The RIP route preference value in the router. The default value is 15. The range
is 1 to 255.
• BGP4
The BGP4 route preference value in the router. The default value is 170. The
range is 1 to 255.
• Submit button
Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.
Non-Configurable Data
Object
Description
• Local
This field displays the local route preference value.