PLANET WGS3-24240 - Manual (Page 518)

User’s Manual of WGS3-24000 / WGS3-24240
518
Neighbor IP Address Shows the IP address of the neighbor router
Interface Index Shows the interface ID of the neighbor router
Area ID Shows the area ID of the OSPF area associated with the interface
Options An integer value that indicates the optional OSPF capabilities supported by the neighbor.
The neighbor's optional OSPF capabilities are also listed in its Hello packets. This enables
received Hello Packets to be rejected (i.e., neighbor relationships will not even start to
form) if there is a mismatch in certain crucial OSPF capabilities.
Router Priority Displays the OSPF priority for the specified interface. The priority of an interface is a
priority integer from 0 to 255. A value of '0' indicates that the router is not eligible to
become the designated router on this network.
Dead Timer Due Shows the amount of time, in seconds, to wait before the router assumes the neighbor is
unreachable.
State Shows the state of the neighboring routers.
Events The number of times this neighbor relationship has changed state, or an error has
occurred.
Retransmission Queue
Length
Is an integer representing the current length of the retransmission queue of the specified
neighbor router Id of the specified interface.
12.7.52 show ip ospf range
This command displays information about the area ranges for the specified . The identifies the OSPF area
whose ranges are being displayed.
▫ Format show ip ospf range
▫ Modes Privileged EXEC
User EXEC
Area ID The area id of the requested OSPF area.
IP Address An IP Address which represents this area range.
Subnet Mask A valid subnet mask for this area range.
Lsdb Type The type of link advertisement associated with this area range.
Advertisement The status of the advertisement. Advertisement has two possible settings:
enabled or disabled.