PLANET WGS3-24240 - Manual (Page 531)

User’s Manual of WGS3-24000 / WGS3-24240
531
Admin Mode This field displays the administrative status of multicast. This is a configured value.
Protocol State This field indicates the current state of the multicast protocol. Possible values are
Operational or Non-Operational.
Table Max Size This field displays the maximum number of entries allowed in the multicast table.
Number Of Packets For
Which Source Not Found
This displays the number of packets for which the source is not found.
Number Of Packets For Which Group Not Found This displays the number of packets for which the group is
not found.
Protocol This field displays the multicast protocol running on the router. Possible values are
PIMDM, PIMSM, or DVMRP. Entry Count This field displays the number of entries in the
multicast table.
Highest Entry Count This field displays the highest entry count in the multicast table.
13.1.9 show ip mcast boundary
This command displays all the configured administrative scoped multicast boundaries.
▫ Format show ip mcast boundary { | all}
▫ Modes Privileged EXEC User EXEC
Unit/Slot/Port Valid unit, slot and port number separated by forward slashes.
Group Ip The group IP address
Mask The group IP mask
13.1.10 show ip mcast interface
This command displays the multicast information for the specified interface.
▫ Format show ip mcast interface
▫ Modes Privileged EXEC User EXEC
Unit/Slot/Port Valid unit, slot and port number separated by forward slashes.
TTL This field displays the time-to-live value for this interface.