PLANET WGS3-24240 - Manual (Page 117)

User’s Manual of WGS3-24000 / WGS3-24240
117
4.3.1.3 VLAN Port Configuration
Figure 4-3-3 VLAN Port Configuration
Selection Criteria
Object Description
• Slot.Port Select the physical interface for which you want to display or configure data.
Select 'All' to set the parameters for all ports to same values.
Configurable Data
Object Description
• Port VLAN ID Specify the VLAN ID you want assigned to untagged or priority tagged frames
received on this port.
The factory default is 1.
• Acceptable Frame
Types
Specify how you want the port to handle untagged and priority tagged frames. If
you select 'VLAN only', the port will discard any untagged or priority tagged
frames it receives. If you select 'Admit All', untagged and priority tagged frames
received on the port will be accepted and assigned the value of the Port VLAN ID
for this port. Whichever you select, VLAN tagged frames will be forwarded in
accordance with the IEEE 802.1Q VLAN standard.
The factory default is 'Admit All'.
• Ingress Filtering Specify how you want the port to handle tagged frames. If you enable Ingress
Filtering on the pulldown menu, a tagged frame will be discarded if this port is not
a member of the VLAN identified by the VLAN ID in the tag. If you select disable
from the pulldown menu, all tagged frames will be accepted.
The factory default is disable.
• Port Priority Specify the default 802.1p priority assigned to untagged packets arriving at the
port.