PLANET WGS3-24240 User Manual
Page 349
User’s Manual of WGS3-24000 / WGS3-24240
349
Selection Criteria
Object
Description
• Slot/Port
Select the slot and port for which data is to be displayed. Slot 0 is the base unit.
Non-Configurable Data
Object
Description
• Mode
The administrative status of PIM-SM in the router: either enable or disable.
• IP Address
The IP address of the selected PIM interface.
• Net Mask
The network mask for the IP address of the selected PIM interface.
• Designated Router
The Designated Router on the selected PIM interface. For point-to- point
interfaces, this object has the value 0.0.0.0.
• Hello Interval
The frequency at which PIM Hello messages are transmitted on the selected
interface.
• CBSR Preference
The preference value for the local interface as a candidate bootstrap router. The
value of -1 is used to indicate that the local interface is not a candidate BSR
interface.
• CBSR Hash Mask
Length
The CBSR hash mask length to be advertised in bootstrap messages if this
interface is elected as the bootstrap router. This hash mask length will be used in
the hash algorithm for selecting the RP for a particular group.
• CRP Preference
The preference value for the local interface as a candidate bootstrap router. The
value of -1 is used to indicate that the local interface is not a candidate BSR
interface.
• Neighbor Count
The number of PIM neighbors on the selected interface.
• IP Address
The IP address of the PIM neighbor for this entry.
• Up Time
The time since this PIM neighbor (last) became a neighbor of the local router.
• Expiry Time
The minimum time remaining before this PIM neighbor will be aged out.
• Refresh button
Refresh the data on the screen with the present state of the data in the router.