PLANET WGS3-24240 - Manual (Page 198)

User’s Manual of WGS3-24000 / WGS3-24240
198
4.4.4 Secure HTTP
Https is a URI scheme used to indicate a secure HTTP connection. It is syntactically identical to the http:// scheme normally
used for accessing resources using HTTP. Using an https: URL indicates that HTTP is to be used, but with a different default
TCP port (443) and an additional encryption/authentication layer between the HTTP and TCP. This system was designed by
Netscape Communications Corporation to provide authentication and encrypted communication and is widely used on the
World Wide Web for security-sensitive communication such as payment transactions and corporate logons.
4.4.4.1 Secure HTTP Configuration
This page is to configuration the secure HTTP connection parameters.
Figure 4-4-19 Secure HTTP Configuration
Selection Criteria
Object Description
• Admin Mode This select field is used to Enable or Disable the Administrative Mode of Secure
HTTP. The currently configured value is shown when the web page is displayed.
The default value is Disable.
• TLS Version 1 This select field is used to Enable or Disable Transport Layer Security Version
1.0. The currently configured value is shown when the web page is displayed.
The default value is Enable.
• SSL Version 3 This select field is used to Enable or Disable Secure Sockets Layer Version 3.0.
The currently configured value is shown when the web page is displayed. The
default value is Enable.
• HTTPS Port Number This select field is used to set the HTTPS Port Number. The value must be in the
range of 1 to 65535. Port 443 is the default value. The currently configured value
is shown when the web page is displayed.
• Submit button Send the updated screen to the switch. Changes take effect on the switch but
these changes will not be retained across a power cycle unless a save is
performed.