PLANET WGS3-24240 - Manual (Page 469)

User’s Manual of WGS3-24000 / WGS3-24240
469
▫ Format spanning-tree mst priority
▫ Mode Global Config
11.1.20 spanning-tree mst vlan
This command adds an association between a multiple spanning tree instance and a VLAN. The VLAN will no longer be
associated with the common and internal spanning tree. The instance is a number that corresponds to the desired
existing multiple spanning tree instance. The corresponds to an existing VLAN ID.
▫ Format spanning-tree mst vlan
▫ Mode Global Config
11.1.20.1 no spanning-tree mst vlan
This command removes an association between a multiple spanning tree instance and a VLAN. The VLAN will again be
associated with the common and internal spanning tree. The instance is a number that corresponds to the desired
existing multiple spanning tree instance. The corresponds to an existing VLAN ID.
▫ Format no spanning-tree mst vlan
▫ Mode Global Config
11.1.21 spanning-tree port mode
This command sets the Administrative Switch Port State for this port to enabled.
▫ Default Disabled
▫ Format spanning-tree port mode
▫ Mode Interface Config
11.1.21.1 no spanning-tree port mode
This command sets the Administrative Switch Port State for this port to disabled.
▫ Format no spanning-tree port mode
▫ Mode Interface Config
11.1.22 spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to enabled.
▫ Default Disabled
▫ Format spanning-tree port mode all
▫ Mode Global Config
11.1.22.1 no spanning-tree port mode all
This command sets the Administrative Switch Port State for all ports to disabled.
▫ Format no spanning-tree port mode all
▫ Mode Global Config