PLANET WGS3-24240 User Manual
Page 311
User’s Manual of WGS3-24000 / WGS3-24240
311
255. If you enter 0 all multicast packets for the selected interface will be
forwarded. You must configure at least one router interface before you will see
this field.
• Submit button
Send the updated configuration to the router. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.
4.7.1.3 Multicast Mroute Summary
This screen displays selected contents of the Mroute Table in tabular form. If there are no routes in the table you will not be
presented with the Selection Criteria.
Figure 4-6-51 Multicast Mroute Summary
Selection Criteria
Object
Description
• Source IP
Enter the IP address of the multicast packet source to be combined with the
Group IP to fully identify a single route whose Mroute table entry you want to
display or clear. You may leave this field blank.
• Group IP
Enter the destination group IP address whose multicast route(s) you want to
display or clear.
Non-Configurable Data
Object
Description
• Incoming Interface
The incoming interface on which multicast packets for this source/group arrive.
• Outgoing Interface(s)
The list of outgoing interfaces on which multicast packets for this source/group
are forwarded.
• Up Time
The time in seconds since the entry was created.