PLANET WGS3-24240 User Manual
Page 186
User’s Manual of WGS3-24000 / WGS3-24240
186
4.4.2.2 RADIUS Server Configuration
This page is to configure the RADIUS server connection features.
Figure 4-4-9 RADIUS Server Configuration
Configurable Data
Object
Description
• RADIUS Server IP
Address
Selects the RADIUS server to be configured. Select add to add a server.
• IP Address
The IP address of the server being added.
• Port
The UDP port used by this server. The valid range is 0 - 65535.
• Secret
The shared secret for this server. This is an input field only.
• Apply
The Secret will only be applied if this box is checked. If the box is not checked,
anything entered in the Secret field will have no affect and will not be retained.
This field is only displayed if the user has READWRITE access.
• Primary Server
Sets the selected server to thePrimary or Secondary server.
• Message Authenticator Enable or disable the message authenticator attribute for the selected server.
• Current
Indicates if this server is currently in use as the authentication server.
• Secret Configured
Indicates if the shared secret for this server has been configured.
• Submit button
Send the updated screen to the switch and cause the changes to take effect on
the switch but these changes will not be retained across a power cycle unless a
save is performed.
• Remove button
Remove the selected server from the configuration. This button is only available
to READWRITE users. These changes will not be retained across a power cycle