PLANET WGS3-24240 - Manual (Page 71)

User’s Manual of WGS3-24000 / WGS3-24240
71
4.2.6.4 Periodic Port Mirroring
Use this page to configure the periodic port mirroring.
Figure 4-2-30 Periodic Port Mirroring
Selection Criteria
Object Description
• Session ID A session ID can be selected. By default the First Session is selected.
Configurable Data
Object Description
• Peroidic Port Mirroring
Mode
Specifies the Periodic Port Mirroring Mode for a selected session ID. By default
Periodic Port Mirroring Mode is Disabled.
• Interval Time Specifies the periodic port mirroring time interval in seconds.Default value is 30.
Valid Range is (30 to 300).
• Submit button Send the updated screen to the switch and cause the changes to take effect on
the switch.
Non-Configurable Data
Object Description
• Source Port Specifies the mirrored port. This field is only visible when periodic port mirroring
mode is enabled. Source port changes periodically as per specified Interval
Time.