PLANET WGS3-24240 - Manual (Page 394)

User’s Manual of WGS3-24000 / WGS3-24240
394
8.6.17 port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical slot and port for a configured
port-channel. The option all sets every configured port-channel with the same administrative mode setting.
▫ Default Enabled
▫ Format port-channel linktrap { | all}
▫ Mode Global Config
8.6.17.1 no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a logical slot and port for a configured
port-channel. The option all sets every configured port-channel with the same administrative mode setting.
▫ Format no port-channel linktrap { | all}
▫ Mode GlobalConfig
8.6.18 port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical slot and port for a configured port-channel,
and name is an alphanumeric string up to 15 characters. This command is used to modify the name that was associated with
the port-channel when it was created.
▫ Format port-channel name { | all}
▫ Mode Global Config
8.6.19 protocol group
This command attaches a to the protocol-based VLAN identified by . A group may only be associated with
one VLAN at a time; however the VLAN association can be changed.
▫ Default none
▫ Format protocol group
▫ Mode VLAN database
8.6.19.1 no protocol group
This command removes the from this protocol-based VLAN group that is identified by this .
▫ Format no protocol group
▫ Mode VLAN database
8.6.20 protocol vlan group
This command adds the physical interface to the protocol-based VLAN identified by . A group may have
more than one interface associated with it. Each interface and protocol combination can only be associated with one group. If
adding an interface to a group causes any conflicts with protocols currently associated with the group, this command will fail and
the interface(s) will not be added to the group.