49 show ip ospf interface brief, 50 show ip ospf interface stats – PLANET WGS3-24240 User Manual
Page 514
User’s Manual of WGS3-24000 / WGS3-24240
514
State
The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router,
and backup designated router.
Designated Router
The router ID representing the designated router.
Backup Designated
Router
The router ID representing the backup designated router.
Number of Link Events
The number of link events.
Metric Cost
The cost of the OSPF interface.
12.7.49 show ip ospf interface brief
This command displays brief information for the IFO object or virtual interface tables.
▫
Format show ip ospf interface brief
▫
Modes Privileged EXEC
User EXEC
Interface
Valid slot and port number separated by forward slashes.
OSPF Admin Mode
States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID
Represents the OSPF Area Id for the specified interface.
Router Priority
A number representing the OSPF Priority for the specified interface.
Hello Interval
A number representing the OSPF Hello Interval for the specified interface.
Dead Interval
A number representing the OSPF Dead Interval for the specified interface.
Retransmit Interval
A number representing the OSPF Retransmit Interval for the specified interface.
Retransmit Delay Interval A number representing the OSPF Transit Delay for the specified interface.
LSA Ack Interval
A number representing the OSPF LSA Acknowledgement Interval for the specified
interface.
12.7.50 show ip ospf interface stats
This command displays the statistics for a specific interface. The information below will only be displayed if OSPF is enabled.
▫
Format show ip ospf interface stats