PLANET WGS3-24240 User Manual
Page 283
User’s Manual of WGS3-24000 / WGS3-24240
283
Action (permit or deny)
All other fields (source and destination port, precedence, tos, etc.) are ignored.
The source IP address is compared to the destination IP address of the route. The source IP netmask in the access
list rule is treated as a wildcard mask, indicating which bits in the source IP address must match the destination
address of the route. (Note that a 1 in the mask indicates a "don’t care" in the corresponding address bit.)
When an access list rule includes a destination IP address and netmask (an extended access list), the destination IP
address is compared to the network mask of the destination of the route. The destination netmask in the access list
serves as a wildcard mask, indicating which bits in the route’s destination mask are significant for the filtering
operation.
Command Buttons
。
Submit - Send the updated configuration to the router. Configuration changes take effect immediately.
。
Delete - Delete the entry of the Source Route selected as Configured Source from the list of Sources configured for
OSPF Route Redistribution.