PLANET WGS3-24240 User Manual
Page 137
User’s Manual of WGS3-24000 / WGS3-24240
137
4.3.5.1 IGMP Snooping Configuration and Status
Use this menu to configure the parameters for IGMP Snooping, which is used to build forwarding lists for multicast traffic. Note
that only a user with Read/Write access privileges may change the data on this screen.
Figure 4-3-19 IGMP Snooping Configuration and Status
Configurable Data
Object
Description
• Admin Mode
Select the administrative mode for IGMP Snooping for the switch from the
pulldown menu. The default is disable.
Non-Configurable Data
Object
Description
• Multicast Control
Frame Count
The number of multicast control frames that are processed by the CPU.
• Interfaces Enabled for
IGMP Snooping
A list of all the interfaces currently enabled for IGMP Snooping.
• Data Frames
Forwarded by the CPU
The number of data frames forwarded by the CPU.
• VLAN Ids Enabled For
IGMP Snooping
Displays VLAN Ids enabled for IGMP snooping.
• Submit button
Update the switch with the values you entered. If you want the switch to retain the
new values across a power cycle you must perform a save. You will only see this
button if you have Read/Write access privileges.