PLANET WGS3-24240 - Manual (Page 62)

User’s Manual of WGS3-24000 / WGS3-24240
62
4.2.5.5 Event Log
This allows logging to any serial device attached to the host.
Figure 4-2-21 Event Log
Configurable Data
Object Description
• Admin Status - A log that is "Disabled" shall not log messages. A log that is "Enabled" shall log
messages. Enable or Disable logging by selecting the corresponding line on the
pulldown entry field.
• Severity Filter - A log records messages equal to or above a configured severity threshold. Select
the severity option by selecting the corresponding line on the pulldown entry field.
These severity levels have been enumerated below:
- Emergency (0) : system is unusable
- Alert (1) : action must be taken immediately
- Critical (2) : critical conditions
- Error (3) : error conditions
- Warning (4) : warning conditions
- Notice(5) : normal but significant conditions
- Informational(6) : informational messages
- Debug(7) : debug-level messages
4.2.5.6 Hosts Configuration
Figure 4-2-22 Host Configuration