PLANET WGS3-24240 - Manual (Page 104)

User’s Manual of WGS3-24000 / WGS3-24240
104
for All Address Conflicts.
• Conflict IP Address IP Address of the conflict to be shown. This field appears only if the user has
selected "Specific Address Conflict" in DHCP Conflict.
Non-Configurable Data
Object Description
• IP Address Specifies the IP Address of the host as recorded on the DHCP server.
• Detection Method Specifies the manner in which the IP address of the hosts were found on the
DHCP Server.
• Detection Time Specifies the time when the conflict was detected in N days NNh:NNm:NNs
format with respect to the system up time.
• Submit button Displays information about the chosen conflict(s).
4.2.12 SNTP
The device supports the Simple Network Time Protocol (SNTP). SNTP assures accurate network device clock time
synchronization up to the millisecond. Time synchronization is performed by a network SNTP server. SNTP operates only as a
client, and cannot provide time services to other systems.
In the System sub-function menu, you can see the SNTP Configuration, by which you can configure the time settings for the
Switch. You can specify SNTP Servers and select GMT Timezone.
4.2.12.1 Global Configuration
Figure 4-2-59 SNTP Global Configuration
Configurable Data