PLANET WGS3-24240 - Manual (Page 339)

User’s Manual of WGS3-24000 / WGS3-24240
339
4.7.4.7 Mtrace Show
This screen displays the results of an mtrace command. The mtrace command is used to trace the path from source to a
destination branch for a multicast distribution tree.
Figure 4-6-74 Mtrace Show
Non-Configurable Data
Object Description
• Number of hops away
from destination
The number of hops away from the destination.
• IP address of
intermediate router
The IP address of the intermediate router in the path being traced between
source and destination for the hop number in the previous field.
• Multicast Protocol in
use
The multicast protocol in use on this hop.
• TTL Threshold The time-to-live threshold on this hop.
• Time taken to forward
between hops
The time taken for the trace request to be forwarded from the previous hop to this
hop.
• New Mtrace button Redirect the web browser to the Mtrace Run screen so that you can initiate
another mtrace command.
• Refresh Refresh the content of the screen with the latest data available on the router.
Typically, it takes around 20 seconds to process the results after initiating mtrace
command. You must refresh the screen to display the latest results.