PLANET WGS3-24240 User Manual
Page 73
User’s Manual of WGS3-24000 / WGS3-24240
73
4.2.6.7 Double VLAN Tunneling Summary
Figure 4-2-32 Double VLAN Tunneling Summary
Non-Configurable Data
Object
Description
• Slot/Port
The physical interface for which data is being displayed.
• Mode
This specifies the administrative mode via which Double VLAN Tagging can be
enabled or disabled. The default value for this is Disabled.
• Customer ID
This is the 12 bit customer ID which will be used as the last 12 bits of the DVlan
tag. The valid range for a customer Id is (0 to 4095).
The default customer Id is 0 .
• EtherType
The two-byte hex EtherType to be used as the first 16 bits of the DVlan tag.
• 802.1Q Tag - Commonly used tag representing 0x8100
• vMAN Tag - Commonly used tag representing 0x88A8
• Custom Tag - Configure the EtherType in any range from (0 to 65535)
• Refresh button
Refresh the data on the screen with the present state of the data in the switch.