PLANET WGS3-24240 User Manual
Page 107
User’s Manual of WGS3-24000 / WGS3-24240
107
• Version Not SupportedTheSNTP version supported by the server is not
compatible with the version supported by the client.
• Server UnsychronizedThe SNTP server is not synchronized with its peers.
This is indicated via the 'leap indicator' field on the SNTP message.
• Server Kiss Of DeathThe SNTP server indicated that no further queries
were to be sent to this server. This is indicated by a stratum field equal to 0
in a message received from a server.
• Server IP Address
Specifies the IP address of the server for the last received valid packet. If no
message has been received from any server, an empty string is shown.
• Address Type
Specifies the address type of the SNTP Server address for the last received valid
packet.
• Server Stratum
Specifies the claimed stratum of the server for the last received valid packet.
• Reference Clock Id
Specifies the reference clock identifier of the server for the last received valid
packet.
• Server Mode
Specifies the mode of the server for the last received valid packet.
• Unicast Sever Max
Entries
Specifies the maximum number of unicast server entries that can be configured
on this client.
• Unicast Server Current
Entries
Specifies the number of current valid unicast server entries configured for this
client.
• Broadcast Count
Specifies the number of unsolicited broadcast SNTP messages that have been
received and processed by the SNTP client since last reboot.