PLANET WGS3-24240 User Manual
Page 242
User’s Manual of WGS3-24000 / WGS3-24240
242
4.6.1.3 IP Interface Configuration
Figure 4-6-3 IP Interface Configuation
Selection Criteria
Object
Description
• Slot/Port
Select the interface for which data is to be displayed or configured.
Configurable Data
Object
Description
• IP Address
Enter the IP address for the interface.
• Subnet Mask
Enter the subnet mask for the interface. This is also referred to as the
subnet/network mask, and defines the portion of the interface's IP address that is
used to identify the attached network.
• Routing Mode
Setting this enables or disables routing for an interface.
The default value is enable.
• Forward Net Directed
Broadcasts
Select how network directed broadcast packets should be handled. If you select
enable from the pulldown menu network directed broadcasts will be forwarded. If
you select disable they will be dropped.
The default value is disable.