PLANET WGS3-24240 - Manual (Page 513)

User’s Manual of WGS3-24000 / WGS3-24240
513
Opaque Link Number of opaque link LSAs in the database.
Opaque Area Number of opaque area LSAs in the database.
Subtotal Number of entries for the identified area.
Total Number of entries for all areas.
12.7.48 show ip ospf interface
This command displays the information for the IFO object or virtual interface tables.
▫ Format show ip ospf interface { | loopback }
▫ Modes Privileged EXEC
User EXEC
IP Address Represents the IP address for the specified interface.
Subnet Mask A mask of the network and host portion of the IP address for the OSPF inter
face.
OSPF Admin Mode States whether OSPF is enabled or disabled on a router interface.
OSPF Area ID Represents the OSPF Area Id for the specified interface.
Router Priority A number representing the OSPF Priority for the specified interface.
Retransmit Interval A number representing the OSPF Retransmit Interval for the specified interface
Hello Interval A number representing the OSPF Hello Interval for the specified interface.
Dead Interval A number representing the OSPF Dead Interval for the specified interface.
LSA Ack Interval A number representing the OSPF LSA Acknowledgement Interval for the specified
interface.
Transit Delay Interval A number representing the OSPF Transit Delay for the specified interface.
Authentication Type The OSPF Authentication Type for the specified interface are: none, simple, and encrypt.
The information below will only be displayed if OSPF is enabled.
OSPF Interface Type Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The OSPF
Interface Type will be 'broadcast'.