PLANET WGS3-24240 - Manual (Page 398)

User’s Manual of WGS3-24000 / WGS3-24240
398
▫ Format set garp timer leaveall all <200-6000>
▫ Mode Global Config
8.6.27.1 no set garp timer leaveall all
This command sets how frequently Leave All PDUs are generated for all ports to 1000 centiseconds (10 seconds).
"
Note : This command has an effect only when GVRP is enabled.
▫ Format no set garp timer leaveall all
▫ Mode Global Config
8.6.28 set gmrp adminmode
This command enables GARP Multicast Registration Protocol (GMRP) on the system. The default value is disable.
▫ Format set gmrp adminmode
▫ Mode Privileged EXEC
8.6.28.1 no set gmrp adminmode
This command disables GARP Multicast Registration Protocol (GMRP) on the system.
▫ Format no set gmrp adminmode
▫ Mode Privileged EXEC
8.6.29 set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a selected interface. If an interface which has GARP enabled
is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP functionality will be disabled on that interface.
GARP functionality will subsequently be re-enabled if routing is disabled and portchannel (LAG) membership is removed from
an interface that has GARP enabled.
▫ Default Disabled
▫ Format set gmrp interfacemode
▫ Mode Interface Config
8.6.29.1 no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a selected interface. If an interface which has GARP enabled
is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP functionality will be disabled on that interface.
GARP functionality will subsequently be re-enabled if routing is disabled and portchannel (LAG) membership is removed from
an interface that has GARP enabled.
▫ Format no set gmrp interfacemode
▫ Mode Interface Config