HEIDENHAIN TNC 426B (280 472) ISO programming - Manual (Page 83)

67 HEIDENHAIN TNC 410, TNC 426, TNC 430
Magnifying or reducing a detail
You can select the graphics display by selecting a detail with the
frame overlay. You can now magnify or reduce the selected detail.
ú Select the soft-key row for detail magnification/reduction
(second row, see figure at right)
The following functions are available:
Function Soft key
Reduce the frame overlay — press and
hold the soft key to reduce the detail
Enlarge the frame overlay — press and
hold the soft key to magnify the detail
ú With the WINDOW DETAIL soft key, Confirm the
selected area.
With the WINDOW BLK FORM soft key, you can restore the original
section.
4.7 Pr
ogr
amming Gr
aphics (not
TNC 426 B
,
TNC 430)
Functions Soft key
Generate interactive graphic blockwise
Generate a complete graphic
or complete it after
RESET + START
Interrupt interactive graphics
This soft key only appears while the
TNC generates the interactive graphics
Ekap4.pm6 29.06.2006, 08:06 67