HEIDENHAIN TNC 426B (280 472) ISO programming - Manual (Page 55)

39 HEIDENHAIN TNC 410, TNC 426, TNC 430
Deleting a file
Calling the file manager
<
Use the arrow keys to move the highlight to the file you wish to
delete:
Move the highlight up or down.
<
Delete a file: Press the DELETE soft key
Delete ........ file ?
<
Press the YES soft key to confirm, or
the NO soft key to abort.
Copying a file
Calling the file manager
<
Use the arrow keys to move the highlight to the file you wish to
copy:
Move the highlight up or down.
<
Copy a file: Press the COPY soft key
Target file =
<
Enter the name of the new file and confirm your entry with the
ENT key or EXECUTE soft key. A status window appears on the
TNC, informing about the copying progress. As long as the TNC
is copying, you can no longer work, or
If you wish to copy very long programs, enter the new file name
and confirm with the PARALLEL EXECUTE soft key. The file will
now be copied in the background, so you can continue to work
while the TNC is copying.
4.3 Standar
d File Manag
ement
TNC 426,
TNC 430
Ekap4.pm6 29.06.2006, 08:06 39