HEIDENHAIN TNC 426B (280 472) ISO programming - Manual (Page 330)

HEIDENHAIN TNC 410, TNC 426, TNC 430 315
Test Run:
■ Display NC software number
■ Display PLC software number
■ Enter code number
■ Setting the Data Interface
■ Showing the Workpiece in the Working Space
■ Machine-Specific User Parameters
■ HELP files (if provided)
In all other modes:
■ Display NC software number
■ Display PLC software number
■ Display code digits for installed options
■ Select position display
■ Unit of measurement (mm/inches)
■ Programming language for MDI
■ Select the axes for actual position capture
■ Axis traverse limits
■ Display datums
■ Display operating time
■ HELP files (if provided)
13.2 System Information
(not TNC 426, TNC 430)
You can use the soft key INFO SYSTEM to display the following
information:
■ Free program memory
■ NC software number
■ PLC software numbers are displayed on the TNC screen after the
functions have been selected. Directly below them are the code
numbers for the installed options (OPT:):
■ Options (if present), e.g. digitizing
13.2 S
yst
em Inf
or
mation (not
TNC 426,
TNC 430)
Pkap13.pm6 29.06.2006, 08:06 315