HEIDENHAIN TNC 426B (280 472) ISO programming - Manual (Page 72)

56 4 Programming: Fundamentals of NC, File Management,
Programming Aids, Pallet Management
4.5 File Management for the TNC 410
Files in the TNC 410 Type
Programs
in HEIDENHAIN conversational format
.H
in ISO format .I
Tables for
Tools
.T
Tool pockets .TCH
Datums .D
Points .PNT
This section informs you about the meaning of the individual
screen information, and describes how to select files and
directories. If you are not yet familiar with the TNC file manager, we
recommend that you read this section completely and test the
individual functions on your TNC.
Calling the file manager
Press the PGM MGT key:
the TNC displays the file management window
The window shows you all of the files that are stored in the TNC.
Each file is shown with additional information that is illustrated in
the table on the next page.
4.5 File Manag
ement f
o
r
the
TNC 41
0
Display Meaning
File name Name with up to 8 characters
and file type
Properties of the file:
M Program is in the
Program Run mode of
operation.
P File is protected against
editing and erasure (Protected)
Display of long file directories Soft key
Move pagewise up through
the file directory.
Move pagewise down through
the file directory
Ekap4.pm6 29.06.2006, 08:06 56