HEIDENHAIN TNC 426B (280 472) ISO programming - Manual (Page 351)

14 Tabellen und Übersichten 336
14.1 Gener
al User P
ar
a
met
ers
14.1 General User Parameters
General user parameters are machine parameters affecting TNC
settings that the user may want to change in accordance with his
requirements.
Some typical user parameters are:
■ Dialog language
■ Interface behavior
■ Traversing speeds
■ Sequence of machining
■ Effect of overrides
Input possibilities for machine parameters
Machine parameters can be programmed as
■ Decimal numbers
Enter only the number
■ Pure binary numbers
Enter a percent sign (%) before the number
■ Hexadecimal numbers
Enter a dollar sign ($) before the number
Example:
Instead of the decimal number 27 you can also enter the binary
number %11011 or the hexadecimal number $1B.
The individual machine parameters can be entered in the different
number systems.
Some machine parameters have more than one function. The input
value for these machine parameters is the sum of the individual
values. For these machine parameters the individual values are
preceded by a plus sign.
Selecting the General User Parameters
General user parameters are selected with code number 123 in the
MOD functions.
The MOD functions also include machine-specific USER
PARAMETERS.
Rkap14.pm6 29.06.2006, 08:07 336