HEIDENHAIN TNC 426B (280 472) ISO programming - Manual (Page 374)

HEIDENHAIN TNC 410, TNC 426, TNC 430 359
TNC Specifications
Block processing time 4 ms/block,
TNC 410: 6 ms/block, 20 ms/block for blockwise execution
via data interface
Control loop cycle time ■ TNC 410 path interpolation: 6 ms
■ TNC 426 CB, TNC 430 CA: Contouring interpolation: 3 ms
Fine interpolation: 0.6 ms (contour)
■ TNC 426 PB, TNC 430 PB: Contouring interpolation: 3 ms
Fine interpolation: 0.6 ms (speed)
Data transfer rate Maximum 115,200 baud via V.24/V.11
Maximum 1 Mbaud via Ethernet interface (optional, not TNC 410)
Ambient temperature ■ Operation: 0° C to +45° C (32° to 113° F)
■ Storage: –30° C to +70° C (–22° to 158° F)
Traverse range Maximum 100 000 mm (2540 inches)
TNC 410: Maximum 30 000 mm (1181 inches)
Traversing speed Maximum 300 m/min (11 811 ipm)
TNC 410: Maximum 100 m/min
Spindle speed Maximum 99 999 rpm
Input range ■ Minimum 0.1µm (0.00001 inches) or 0.0001° (TNC 410: 1 µm)
■ Maximum 99 999.999 mm (3937 inches) or 99 999.999°
TNC 410: Maximum 30 000 mm (1181 inches) or 30 000.000°
14.3 T
e
c
h
n
ic
a
l
In
fo
rmation
Rkap14.pm6 29.06.2006, 08:07 359